殘渣的處理辦法一:
Treatment method I of residue:
準備好緊迫驅動軟管,將問題小型混凝土攪拌車熄火,卸下液壓馬達上的高壓油管接頭。將救援車熄火,將其液壓馬達的高壓油管卸下,并與問題車上的對應接頭用緊迫驅動軟管相連。發起救援車,將其操作手柄撥出料方位,問題車內的混凝土即被排出。緊迫驅動結束后,將驅動軟管卸下,并恢復兩車原狀。
Prepare the emergency drive hose, turn off the small concrete mixer in question, and remove the high-pressure oil pipe connector on the hydraulic motor. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it with the corresponding connector on the problem vehicle with emergency drive hose. Launch the rescue vehicle, turn its operating handle to the discharge direction, and the concrete in the problem vehicle will be discharged. After the emergency drive, remove the drive hose and restore the two vehicles to their original state.
殘渣的處理辦法二:
Treatment method 2 of residue:
假如上種辦法實施有困難,則選用以下辦法,當即排出混凝土。在小型混凝土攪拌車殘渣的處理托輪和滾道之間放入木楔,以操控攪拌筒的旋轉;將發起機熄火,拆松液壓馬達的一根高壓油管,攪拌筒可自在旋轉,操控攪拌筒的旋轉,使修理孔轉到下部,然后翻開修理孔,整理出筒內混凝土?;炷僚懦鼋Y束后,恢復小型混凝土攪拌車殘渣的處理的原狀。
If it is difficult to implement the above method, the following methods shall be selected to discharge the concrete immediately. Put a wooden wedge between the treatment supporting wheel and the raceway of the residue of the small concrete mixer to control the rotation of the mixing drum; Turn off the starter, remove a high-pressure oil pipe of the hydraulic motor, and the mixing drum can rotate freely. Operate the rotation of the mixing drum to turn the repair hole to the lower part, and then open the repair hole to sort out the concrete in the drum. After the discharge of concrete, restore the treatment status of residue of small concrete mixer truck.
. The above is the automatic concrete mixer http://www.bosplumbing.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!