要先檢查下離合油殼里的剎車油是否夠用,如果油不夠,離合怎么可能會(huì )生效?如果油量檢查正常,那么先上車多踩幾腳離合,看是否掛檔有,那么是因為離合油路中存在空氣,先排空氣再試試。
First, check whether the brake oil in the lower clutch oil case is sufficient. If the oil is insufficient, how can the clutch take effect? If the fuel quantity is normal, step on the clutch for several times to see if there is air in the clutch oil circuit. Exhaust the air first and try again.
如果油夠的活,請檢查離合總泵、離合分泵四周有無漏油現象,混凝土自上料攪拌車廠家認為如果有漏油,在不考慮維修,只單單考慮問題的情況下,更換漏油的分泵或總泵處理。
If there is enough oil, please check whether there is oil leakage around the clutch master pump and the clutch slave pump. The manufacturer of the concrete self loading mixer thinks that if there is oil leakage, the leaking slave pump or master pump shall be replaced without considering maintenance and only considering solving the problem.
混凝土自上料攪拌車離合器不分離怎么辦?
What if the clutch of concrete self loading mixer does not separate?
更換好漏油的總泵或分泵后,再次給離合總泵處的油殼加入剎車油;再找另外一人幫你起動一面猛踩離合踩到次數踩住不放,另一個人在下面排空氣,排完后鎖緊空氣螺絲,再重復上述流程?;炷磷陨狭蠑嚢柢?chē)
After replacing the leaking master cylinder or slave cylinder, add brake oil to the oil case at the clutch master cylinder again; Find another person to help you start and step on the clutch for several times. The other person will exhaust the air below. After that, lock the air screw and repeat the above process. Concrete self loading mixer
直到排到離合感覺高起來,放空氣螺絲放不出氣泡出來為止。鎖緊放空氣螺絲,同時檢查離合分泵及總泵兩者的分享推桿的自由間隙,一般為兩到三毫米左右,手感有點間隙則可。
Until the clutch feels high and the air release screw can not release air bubbles. Lock the air release screw, and check the free clearance of the shared push rod of the clutch slave cylinder and the master cylinder, which is generally about two to three millimeters. If there is a little clearance, it is OK.
The above is the fully automatic self feeding mixer introduced to you http://www.jufengjiaobanji.com/ I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service