平口攪拌車上面有一些配件,這些配件需要提前做好防腐處理。才能延長其配件的使用壽命,進而延長平口攪拌車的使用壽命。
There are some accessories on the flat mixer, which need to be treated in advance. Only in this way can the service life of the accessories be extended, and then the service life of the flat mixer be extended.
平口攪拌車配件防腐處理的方法:
Anti corrosion treatment method of flat mixer accessories:
1、利用滲碳、淬火等方法,提高平口攪拌車零件的硬度、韌性和耐磨性,也能收到良好的效果。表現形式:斷裂、表面剝落:處理方法:在穩定土拌合站制造過程中提高零件表面的光潔度,采用比較緩和的斷面過濾,以減少零件的應力集中。
1. By means of carburizing, quenching and other methods, the hardness, toughness and wear resistance of flat mixer parts can be improved, and good results can also be obtained. Manifestation: fracture, surface spalling: treatment method: improve the surface finish of parts in the manufacturing process of stabilized soil mixing plant, and adopt mild section filtration to reduce the stress concentration of parts.
2、采用耐磨防腐新材料對配件進行一次性耐磨防腐處理,RJ耐磨防腐新材料既可對平口攪拌車配件在未安裝前進行一次保護處理,又可對使用時間長、磨損嚴重,甚漏漿的槽體進行處理,處理后的槽體仍可長期使用,保證其壽命為攪拌配件壽命的數倍。
2. The new wear-resistant and anti-corrosion material RJ can not only protect the flat mixer accessories before installation, but also treat the tank with long service time, serious wear and even slurry leakage. After treatment, the tank can still be used for a long time, and its service life is several times longer than that of the mixing accessories.